+49 (0)5723 94 17 0 info@rosho.de

Construction

More safety on construction sites: Camera monitor systems for construction vehicles

Maximum visibility and more safety on the construction site

Whether tipper loader, crane or construction machine – large construction vehicles place high demands on their drivers when manoeuvring and working. In order to eliminate sources of danger, the driver must maintain an overview at all times. This is easy to say when blind spots to the rear and sides of construction site vehicles can hardly be avoided. Even the somewhat elevated seat, as e.g. on an excavator, does not always ensure that the operator can keep an eye on everything that is relevant. And: Not only reversing can become a challenge, but also driving into traffic.

Turn assistant and ADAS systems

SIMPLY SWITCH OFF THE BLIND SPOT:
ROSHO turncam® turn assistant

The ROSHO TurnCAM® turn assistance system is made up of just a few reliable components: A specially developed wide-angle camera is mounted on the right side of the vehicle and captures the close-up area to the side of the vehicle. It registers every moving object that is in the danger zone.

Despite the mandatory mirrors, many zones around the vehicle are only incompletely covered. For example, when turning right, several traffic situations must be detected at the same time (vehicle traffic from the front and the side, crossing pedestrians and also cyclists who sidle past the vehicle from behind). Since the side mirror alone is often not sufficient, the turn assistant TurnCAM® with its innovative AI technology and special side cameras helps to carry out the turn safely.

SPECIALLY DEVELOPED SYSTEM SOLUTIONS FOR Heavy Goods Vehicles (HGV)

  • Significantly improves traffic safety on the road and on construction sites through additional safety when turning
  • Monitoring of the right-hand side close-range area through specially developed wide-angle camera
  • Detects critical traffic situations independently through intelligent image evaluation
  • When a person or object is detected, a visual and optionally additional acoustic warning signal is given to the driver
  • The system is specially adapted to the requirements in HGVs.

Example of monitor installation location:

The TurnCAM® Detection Box has a detection function for the side camera and intelligent image processing. It controls the vehicle display, which displays a visual warning in the event of danger and can also be used as a reversing monitor. The on/off activation of the additional acoustic warning function (by means of a small loudspeaker) is carried out by the indicator signal or other GPIO signals.

Example installation location camera:

Optionally, an extension for an activation via GPS signal as well as the connection to an analogue steering angle sensor is available. This means that the acoustic signal does not sound every time a bicycle passes, but only in really critical situations. This optimisation of the warning function ensures that the driver is only warned acoustically in really critical cases.

The TurnCAM® fulfils all technical requirements that the German Federal Ministry of Transport has formulated for turn-off assistance systems.

Example of a TurnCAM® turn assistant diagram

DEFUSING CRITICAL SITUATIONS ELECTRONICALLY: ROSHO ADAS FRONT WARN SYSTEM

The ADAS-D21FWS advanced driver assistance system, based on leading computer vision technology, uses cameras to perceive the road environment, including vehicles, lanes, pedestrians, traffic signs, etc. It’s able to reduce collision accidents by providing early warnings when it detects potential collision hazards while driving. The EWS system supports FCW, LDW, HMW, PCW, etc. The ADAS-D21FWS system can be used in almost all types of vehicles.

The system can monitor the vehicles ahead in real time, and when the system detects a possible collision, it issues warnings to remind the driver to slow down or brake.

If the vehicle does not maintain the distance and is too close to the vehicles ahead, the system issues warnings reminding the driver to maintain a safe distance.

The system can monitor the side lanes, and as soon as the vehicle leaves the current lane without using the indicator, it issues a warning.

If there is an imminent risk of collision with pedestrians, a warning is also given to remind the driver to slow down or brake.

Camera monitor systems

PROACTIVELY PROTECT HUMAN AND MACHINE!

To ensure your construction vehicles and other special vehicles are safe on all roads, our tried and tested camera monitor systems provide the necessary visibility to each side of the vehicle and for each manoeuvring area. In addition, there are many accessories, from A to Z, for adapter to accessories – plus, of course, HD monitors in many sizes, high-resolution cameras with up to five megapixels, shock-resistant electronics, connectors for all types of vehicles and much more. On request, we will put together the right system individually – entirely according to your requirements.

All systems are E-certified and ROHS compliant. The components used are developed for robust operation in commercial vehicles. The simple plug & play concept makes the systems easy and quick to install on the vehicle.

More visibility with camera monitor systems from ROSHO:

  • Front View
    Dual front vision system for unobstructed view at blind exits and entrances for use with different front attachments.
  • Reversing area
    Facilitates manoeuvring with large machines as well as dump trucks or large trailers.
  • Complete working area – ROSHO H-System
    Complete all-round view around the vehicle: four exterior cameras are displayed in an H-shape on the driver’s monitor – this intuitive arrangement makes manoeuvring easier.

Your advantage through ROSHO camera monitor systems:

  • Analogue and digital technology approaches
  • Extensive selection of extremely high-resolution monitor and camera variants
  • Compliance with the highest safety standards and IP protection classes
  • Expandable with vehicle-specific adapters and a wide variety of connection and spiral cable sets
  • Modular system components
  • Certified for use in all commercial vehicles

We offer retrofit solutions for almost all applications, such as wheel loaders

Retrofit solutions for special machines

Retrofit solutions for excavators

Your advantage with ROSHO camera monitor systems:

  • Prevention of costly damage to the vehicle and the associated expensive downtimes
  • Elimination of the “blind spot” through comprehensive vicinity detection
  • Prevention of collisions with people and thus protecting health
  • Safer and easier manoeuvring
  • Reduction of stress due to better all-round visibility
  • Possible reduction of insurance premiums (depending on the respective insurer)
  • Installation of the systems directly at the vehicle manufacturer’s or bodyshop, as ROSHO is a long-standing OEM partner of many leading manufacturers.

 

Cables & accessories

ALWAYS THE RIGHT CONNECTION

As accessories to our automotive products, we offer special connection cables and connecting leads. These include spiral cable solutions and vehicle-specific adapters as well as brackets and special connectors. As with all other products from our company, our accessories are of original equipment quality. Through our permanent product monitoring and quality control, we ensure that all components always meet the highest customer demands – and are characterised by extreme robustness and durability.

On request, our accessories are precisely tailored to the needs and specifications of commercial vehicles and mobile machinery.

Do you have any more questions?

Our experts for your industry sector are looking forward to your call or e-mail.

Construction vehicles

Carsten Pruß
Phone +49 5723 94 17 34
Mobile +49 173 79 973
carsten.pruss@rosho.de

Viktor Brozmann
Phone +49 5723 94 17 12
Fax. +49 5723 94 17 50
viktor.brozmann@rosho.de

Camera systems for commercial vehicles for construction sites and on the road

To ensure that your contruction vehicles and other special vehicles are safe on all roads, our tried and tested camera monitor systems provide the necessary visibility to each side of the vehicle and for each manoeuvring area. In addition, there are many accessories, from A to Z, for adapter to accessories – plus, of course, HD monitors in many sizes, high-resolution cameras with up to five megapixels, shock-resistant electronics, connectors for all types of vehicles and much more. On request, we will put together the right system individually – entirely according to your requirements.

More visibility with camera monitor systems from ROSHO:

Front View
Dual front vision system for unobstructed view at blind exits and entrances for use with different front attachments.
Reversing area
Facilitates manoeuvring with large machines as well as dump trucks or large trailers.
Complete working area – ROSHO H-System
Complete all-round view around the vehicle: four exterior cameras are displayed in an H-shape on the driver’s monitor – this intuitive arrangement makes manoeuvring easier.

Turn assistant TurnCAM®:
Simply eliminate the blind spot

Innovative camera technology meets intelligent recognition software: our turn-off assistant TurnCAM® increases safety in flowing traffic and minimises the danger to pedestrians, cyclists and other road users.

Proactively protect man and machine

With camera technology from ROSHO you avoid accidents and make work easier for your employees.

Manoeuvring large machines safely

Even experienced drivers don’t have their eyes everywhere – unless our camera systems are driving along.

~

Opt for durable, robust technology

Unsere Komponenten sind „Engineered in Germany“ und unterliegen strengen Qualitätskontrollen.

Benefit from our experience

As an experienced system provider, we individually configure the right solution for you.

Cookie Consent with Real Cookie Banner